Description

• ALL WIRING IS INCLUDED
• LiFePO4 Chemistry
• 100Ah Capacity - 5120kWh
• SELF-HEATING - Charge as low as -25°C
• 100A Max Continuous Discharge (119A 5mins Discharge) (200A 15sec Peak Discharge)
• CAN/RS485 Communication
• Compatible INVERTER list - Victron/Sol-Ark/Solis/Growatt/Studer/Goodwe/Sunsynk/Voltronic/ALPHA-OUTBACK/Deye/Sofar/SMA
• LUXPOWER/Schneider/TBB/MPP/SAJ/MEGAREVO
• Max 32 in parallel, Plug & Play
• 6000+ Cycle life & Maintenance-free
• 11 Year Manufacturer Warranty

Specifications

Weights & Dimensions

Recommended Charging settings

To properly charge your Epoch Batteries, you will want to verify that any charging component in your system is capable of being programmed for the following specifications. Charging components can include, but are not limited to converters, inverter chargers, solar charge controllers, DC to DC chargers, etc.

• Bulk/Absorption: 14.2V – 14.6V
• Absorption Time: Two batteries in parallel connections require 30 minutes 200Ah
• Float: 13.4V – 13.8V
• Equalization: 14.4V/ Disabled
• Temperature Compensation: 0/Disabled
• Charge Rate: 50% of the battery or battery bank capacity
• Battery Charge Temperature Range: 32°F (0°C) to 131°F (55°C)
• Battery Discharge Temperature Range: -4°F (-20°C) to 140°F (60°C)
• Cell Charge Temperature: 32°F (0°C) to 131°F (55°C)

NOTE: Not all chargers are capable of multistage charging. If yours is not, you will want to verify it can be programmed for the Bulk/Absorption voltage and have the other items mentioned disabled if applicable. Consult your charger's manual or the manufacturer.

Best-in-class 11 year warranty