The ProDucer "Transducer Pole System" Basic Mid Ram Mount Arm
The ProDucer Transducer Pole System Basic Mid Arm will have the medium length arm/stem D size Ram Mount, standard 2x3 rectangle base, and the one peice sleeve clamp.
Mid Arm Dimensions:
- Overall Length: 10.7" when assembled with the sleeve clamp and 2x3 rectangle base.
We developed the 60" shaft out of fiberglass utilizing a marine-grade resin for strength and longevity. Lifetime warranty on the shaft. The inside diameter allows for the transducer cable to be run inside the shaft eliminating the need to have the transducer cable "zipped tied" outside the shaft. This was part of the simple, clean appearance we were looking for. The fiberglass shaft along with the D-Size 2.25" RamMount allow for the "break-away" ability thus not causing damage to the shaft or transducer if striking an underwater object. The ProDucer Transducer Pole System allows the angler total control of the transducer to be pointed at the intended target and not have their images skewed by the trolling motor turning left/right etc...when operating in anchor "spot lock". That being said The ProDucer Transducer Pole System is also a great option for any transducer and can be rotated in a 360-degree fashion to see all around your boat.
For those that have an electric-steer trolling motor like the xi3, xi5, Ulterra, Terrova or PowerDrive V2 The ProDucer Transducer Pole System is simply another option to mount the transducer to instead of purchasing the cable guard system required from other companies to mount a transducer to those type trolling motors.
Mounting: The ProDucer Transducer Pole System can be mounted to the Fortrex or Ultrex trolling motor side plate or to the gunnel of your boat.
The RamMount is 3.25 lb. (which is dead weight when attached to the boat) and the PoleDucer is 5.25 lb.
The ProDucer Transducer Pole System allows for the end-user to keep in touch with there target 100%
* Marine Grade Fiberglass shaft (no bending of the shaft if you bump a tree)* Ram Mount Break-A-Way ability (keeps from breaking your transducer)
* All Transducer Cables slide up the center of the shaft (no need to manage the transducer cable with zip ties or tape)
(transducer/s not included)
The the difference between The ProDucer Basic and ProDucer Deluxe will be the handles. The ProDucer Basic will have the 12" all thread on a shaft collar with a knob handle and The Producer Deluxe will have the HelmsMate Tiller handle with u-Joint.
UPDATE...since the videos "below" were produced we have made improvement to The ProDucer Transducer Pole System. We went with a one peice ram ball sleeve clamp over the two ubolts and have gone with the 2x3 rectangle base mount over the round 3.68" base mount. We also offer a Short Ram stem and a Mid Ram stem.
Videos Hide Videos Show Videos
4 Reviews Hide Reviews Show Reviews
Great quality product as always
Well thought out and well built transducer pole. Has all the parts to fulfill my set-up needs. Saved me a lot of time trying to design and build one myself.
Haven’t had the chance to get it on the water yet but got it mounted and have no doubt it will work great. Quality is excellent, it’s sturdy and well designed! I’m very impressed with the customer service. They are easy to contact, answer the phone, and even call back! Very satisfied with the purchase and I highly recommend if you want to mount your transducer off the trolling motor.